Otwarcie konferencji

Malgorzata Lewandowska 3Jerzy Kątcki 1Krzysztof J. Kurzydlowski 3Witold Łojkowski 2

1. Instytut Technologii Elektronowej (ITE), al. Lotników 32/46, Warszawa 02-668, Poland
2. Instytut Wysokich Ciśnień PAN (IWC), Sokołowska 29/37, Warszawa 01-142, Poland
3. Wydział Inżynierii Materialowej Politechniki Warszawskiej (WIMPW), Wołowska 141, Warszawa 02-507, Poland

Abstract

Oficjalne otwarcie konferencji, prezentacja jej celów i programu.

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Strategic Programmes - Tools for Financing Research and Development in Poland
  4. Quo Vadis nanotechnology- for various stakeholders
  5. Opening of the Thursday Sessions of NanoPl 2014
  6. Microwave reactors for nanoparticle's synthesis
  7. Financing of industry relevant projects in Poland
  8. Opening of Nano-Bio-Med session
  9. Joining ultrafine grained aluminium by friction stir welding - processing, microstructure and mechanical properties
  10. Experimental evaluation of melting point depression in AlSi/AlN nanomultilayer system
  11. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  12. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  13. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  14. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  15. Electrospun nanocomposites from PHBV for bone tissue engineering
  16. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  17. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  18. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  19. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  20. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  21. Polish Nanotechnology Platform - a discussion group at Linked-In
  22. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  23. Nanometrology as a tool for nanotechnology problems solving
  24. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  25. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  26. Nanotechnologie w gospodarce województwa podlaskiego
  27. (Cd, Mn)Te Crystals for X and Gamma Radiation Detectors - an Alternative Material to CdTe and (Cd,Zn)Te. 
  28. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  29. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  30. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  31. [CEPT] Studies of nanoparticles size distribution
  32. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  33. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  34. Industrial perspectives of nanometals
  35. SEM studies of the etched surface of (Cd,Mn)Te
  36. Modeling of growth kinetics of SiC single crystal in PVT process
  37. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  38. ZnO nanoparticles effect on integrity of human endothelial cells
  39. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  40. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  41. Application of micro- and nanostructured biomaterials in regenerative medicine
  42. Welcome address
  43. Core-shell P(LLA-CL) based electrospun nanofibers for peripheral nerve tissue engineering
  44. Otwarcie NanoInfoDay, Powitanie
  45. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  46. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  47. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  48. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  49. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  50. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  51. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  52. Surface modification of PCL scaffold changes protein adsorption
  53. Atomic force microscopy characterization of corneocytes
  54. TiO2 nanotubes based composite layers for biomedical applications
  55. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  56. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  57. Synthesis of highly biocompatible hydroxyapatite nanopowders
  58. Nanosafety - challenge of nowadays
  59. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  60. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  61. Podsumowanie
  62. Scale up of nanometals production
  63. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  64. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  65. Modification of epoxy resin properties by adding multi wall carbon nanotubes
  66. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  67. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  68. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  69. Możliwości badawcze Laboratorium Skaningowej Mikroskopii Elektronowej na WIM PW
  70. Procedury charakteryzacji nanoproszków
  71. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  72. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  73. Nanotechnologie elektroniczne i fotoniczne w Polsce
  74. Perspektywy rozwoju nanomateriałów konstrukcyjnych i funkcjonalnych
  75. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  76. Zastosowania mikroskopii AFM dla farmacji i medycyny
  77. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  78. Wykorzystanie nanotechnologii w procesie odlewania precyzyjnego
  79. Oczyszczanie i modyfikacja nanomateriałów węglowych
  80. Modyfikacje polimerów stosowanych w lotnictwie za pomocą nanorurek węglowych
  81. Luminescent polyurethane nanocomposites: processing, structure and properties
  82. Micro Sensor for cell force measurement
  83. Preliminary studies on degradation of polylactides fibers
  84. Effect of grain size on reactive diffusion between Ti-Al
  85. TEM investigations of the nanostructure, multilayer CrN/Cr coatings obtained by vacuum-arc method
  86. Bulk  nanostructured  titanium  fabricated  by  hydrostatic  extrusion
  87. Composites PLLA/MWNTs produced by twin-screw microcompounder
  88. Polyurethane-based material with calcite and aragonite for tissue engineering composite scaffolds
  89. ZrO2:Tb nanopowders obtained by coprecipitation method
  90.  A  degradable and highly porous polyurethane scaffolds for bone tissue engineering
  91. Reduced activation ODS ferritic steel – recent development in high speed hot extrusion processing
  92. Investigation of the DLC and novel DLC-polymer hybrid coatings using FIB and SEM techniques
  93. A combination of microCT and FEM methods for development of a new scaffold for bone regeneration
  94. Properties of transparent elastomer nanocomposites (polyurethane/ ZrO2:Eu3+) as materials for optoelectronic application
  95. Investigation of fatique crack growth rate of Al 5484 ultrafine grained alloy after ECAP process
  96. Fire retardant polyurethane elastomers/aluminophosphorate nanocomposites for higher temperature application
  97. The influence of grain refinement on the corrosion mechanism of 7475 aluminium alloy
  98. Wear resistance of the nanostructured 316 LVM austenitic stainless steel processed by hydrostatic extrusion
  99. Modelling the influence of the grain size distribution on the properties of nanometals
  100. Hybrid functional applied to the study of properties of narrow and wide band gap semiconductors
  101. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  102. Recrystallization and Grain Growth in Nano-structured Austenitic Stainless Steel under Electric Current Heating
  103. Effect of deformation and strain rate on diminishing of microstructure of aluminium alloys (AlCu4Zr0.5 and AlZn6Mg3CuZr)
  104. Grain refinement in CuCrZr by SPD processing
  105. Tailoring mechanical properties of nano-structured Eurofer 97 steel for fusion applications
  106. Microscopic and surface analytical characterization of TiO2 nanotubes produced by anodic oxidation and thermal treatment 
  107. Hydrothermal Synthesis of ZnAl2O4 Spinel
  108. Investigation of cells interactions with textile scaffolds for bone tissue enginnering
  109. Culture of osteoblasts on nanostructured titanium – preliminary observation
  110. Electrospun polymeric fibers for cartilage regeneration
  111. Biodegradable and bioabsorbable polymeric - ceramic composites for medical applications
  112. Modelling of plastic deformation of nano-polycrystalline materials
  113. Preliminary examinations of mechanical properties of DLC and novel DLC-polymer hybrid coatings for resurfacing hip prostheses
  114. Optimization of the polymeric scaffolds for bone tissue engineering fabricated by rapid prototyping method
  115. Bone tissue engineered product based on human bone derived cells and polyurethane scaffold
  116. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  117. Molecular statics simulation of nanoindentation on nanocrystalline copper
  118. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  119. Excitation transfer in zirconia nanocrystals and ceramics
  120. Ceramic-polymer composites for medical application
  121. Eu Luminescence in zirconia nanocrystals
  122. ZnO ceramic sintering and luminescence properties
  123. Microstructural and mechanical characterization of zirconia based composite
  124. The influence of nanosilica on wear resistance of ceramic-polymer composites intended for dental fillings
  125. Modeling of order-disorder phase transition in intermetallic compounds
  126. Optimization of polyurethane structure as the potential materials for bone tissue engineering applications
  127. Fabricationg polyurethane/calcium carbonate composite scaffold for bone tissue engineering
  128. Polyurethane nano-composites with luminescence properties for optics and optoelectronics applications.
  129. Tailoring mechanical properties by grain refinement and particle redistribution
  130. Stochastic Approach To The Changes In The Mechanical Properties Of Nano-Crystalline Materials Induced By Grain Growth
  131. Surface effect on atomic ordering in nano-layered L10 AB binaries: multiscale Monte Carlo Simulation
  132. Nowe materiały metaliczne o strukturze nanometrycznej do zastosowań w nowoczesnych gałęziach gospodarki
  133. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  134. Strategia rozwoju badań nanoproszków
  135. Error bars in powder diffraction
  136. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  137. Characterization of nanopowders
  138. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  139. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  140. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  141. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  142. Doped zirconia nanopowders made in microwave – pressure reactor
  143. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  144. Recent Advances in Making Nanometals by Heavy Plastic Deformation
  145. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  146. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
  147. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminium alloy
  148. The effect of grain size distribution on mechanical properties of nanometals
  149. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
  150. Measurement of distorting magnetic field inside the scanning electron microscope with the use of microscope itself
  151. Determination of densities of various dislocation types in GaN – comparison of TEM and improved hot acid etching method
  152. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  153. Electron microscopy studies of magnesium hydride
  154. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
  155. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
  156. Characterization of the effects of hydrostatic extrusion on structure and surface properties of 303 austenitic stainless steel
  157. The Effect of Hydrostatic Extrusion on the Corrosion Stability of Austenitic Stainless Steels
  158. The Effect of Hydrostatic Extrusion on Resistance of 316 Austenitic Stainless Steel to Pit Nucleation
  159. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  160. On some peculiarities of electrochemical oxidation of Ti and Ti6Al6V alloy
  161. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  162. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  163. Nanomaterials in dental applications
  164. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  165. Study of undoped and doped zirconia nanocrystals luminescence
  166. Nanostructure formation in austenitic stainless steel
  167. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
  168. Hydrogen induced changes in 316L stainless steel microstructure
  169. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  170. Statistical model of grain growth in polycrystalline nanomaterials
  171. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  172. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  173. Repair and regeneration of osteochondral defects in the articular joints
  174. Production of doped and non doped ceramics nanoparticles for optical applications
  175. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  176. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  177. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  178. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  179. Corrosion resistance of nanostructured titanium
  180. Effect of surface treatment on the microstructure of TA6V
  181. Cathodoluminescence of Al doped ZnO nanopowders
  182. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  183. Predicting site occupation of Fe in B2 NiAl from ab initio computations
  184. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  185. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  186. Structure and properties of polyurethane/YAG:Tb3+ nano-composites with luminescence properties
  187. Structure and thermal properties of epoxy resins nano-composites with flame retardants
  188. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  189. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  190. An influence of boehmite modification on the dispersion in the polyurethane matrix
  191. Materials hardness estimation by simulation of the indentation process
  192. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  193. Stability of second phase particles during processing by hydrostatic extrusion
  194. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
  195. Grain Boundary Migration in Nanocrystalline Iron
  196. TEM study of iridium silicide contact layers for Low Schottky Barrier MOSFETs
  197. Thermal properties of L10-TiAl from first principle calculations
  198. Structural stability of zirconia ceramic in water and acid solutions
  199. The influence of the structure of metastable τ - phase on magnetic hysteretic properties of Мn55.5Аl44С0.5 alloy
  200. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
  201. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  202. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  203. Nasze wyniki, zdania i sposoby ich realizacji
  204. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  205. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  206. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  207. Accuracy of XRD size measurements of nanocrystals
  208. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  209. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  210. Preliminary research on zirconia based optical oxygen sensor
  211. Evaluation of degradation degree of dental hybrid composite used as permanent fillings
  212. Preparation and electrical properties of the BaTiO3 nanoceramics
  213. Optimization of particle reinforced lead-free solders
  214. Microstructural evaluation during particles addition to lead-free solders
  215. Thermal stability of hybrid polyurethane and modified boehmite
  216. Applications of quantitative image analysis to the description of the morphology of hybrid polyurea-nitryle-urethanes
  217. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  218. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  219. Time-resolved luminescence of nanostructured ZnO
  220. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  221. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  222. Yttria stabilized zirconia nanocrystals luminescence
  223. Improvement of wetting and bonding of SiO2 ceramics and urea-urethane elastomer
  224. A hybrid atomistic-continuum finite element modelling of locally disordered crystalline structure
  225. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  226. Optical investigations of RE-doped YAG nanoceramics
  227. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts
  228. The size effect in strength and fracture toughness of deformation origin submicro- and nanomaterials.
  229. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
  230. Fabrication and micro-structure characterization of Al2O3/Ni-P composites with interpenetrating phases
  231. Hydrostatic extrusion of intermetallic Ti-Al layers
  232. PULSE PLASMA SINTERING OF A NANOCRYSTALLINE Cu POWDER
  233. NANOCRYSTALLINE Cu-Al2O3 COMPOSITES SINTERED BY THE PULSE PLASMA TECHNIQUE
  234. Mechanical properties of aluminium processed by equal channel angular pressing
  235. MECHANISM OF GRAIN REFINEMENT IN ALUMINIUM ALLOYS IN THE PROCESS OF HYDROSTATIC EXTRUSION
  236. Electrical properties of nanocrystalline ZrO2 at high-pressure
  237. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  238. Model for intermetallic phase and intermetallic compound solidification during diffusion soldering
  239. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  240. Texture Development in Model Al-Li Alloy Subjected to Severe Plastic Deformation
  241. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
  242. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  243. Microstructure refinement under high plastic strain rates in hydrostatic extrusion process
  244. Influence of severe plastic deformation on PLC effect in Al 5XXX alloy
  245. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  246. Formation of ultrafine gradient structure in hard magnetic alloy Fe-30%Cr-8%Co
  247. Sintering temperature effect on structure and properties of Al2O3/Ni-P composites with interpenetrating phases
  248. PLASTIC PROPERTIES OF GaN AND Al2O3 CRYSTAL: FEM-SIMULATION OF NANOINDENTATION CONFIRMED BY HIGH-RESOLUTION MICROSCOPY
  249. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  250. SEM investigations of tooth/ filling bonding
  251. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  252. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  253. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  254. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  255. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  256. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  257. Biocompatibility of thin films based on hydrothermal synthesized HAp
  258. Nanometals for medical applications
  259. Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
  260. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
  261. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  262. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
  263. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  264. Polymer matrix composites with nanoparticles of TiC obtained by a sol-gel method
  265. Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
  266. FINITE ELEMENT MODELLING OF THE RESIDUAL STRESSES IN THE CERAMIC-ELASTOMER COMPOSITES
  267. Luminescence of ZrO2 nanocrystals
  268. Molecular impurities in the luminescent ZnO nanocrystals
  269. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  270. THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
  271. Modelling the interaction of crack tip with nanostructure, which creating by deformation.
  272. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
  273. IN VIVO WEAR OF POLYETHYELNE GLENOID COMPONENTS IN TOTAL SHOULDER ARTHROPLASTY
  274. Atomic-scale Ab-initio computations of the B2-RuAl
  275. Ab-initio calculations of elastic properties Ni3Al and TiAl under pressure
  276. Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
  277. Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
  278. Structural-strength aspects of glass/metallic composite based on Co-Cr-Mo implantation alloy
  279. X-Ray investigations of the natural and artificial White Etching Layer
  280. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
  281. Microstructure of the ceramic - polymer composites for dental applications
  282. Effect of Non-conventional Large Deformations on Microstructure and Properties of Metals
  283. Diffusion and diffusion induced defects in GaN
  284. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  285. Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
  286. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  287. Al2O3-Fe functionally graded materials fabricated under magnetic field
  288. Relaxation processes in ZrO2 at high pressures
  289. Transmission Electron Microscopy of Iridium Silicide Contacts for Advanced MOSFET Structures with Schottky Source and Drain
  290. Luminescence of ZrO2 and ZnO nanocrystals
  291. Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
  292. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  293. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  294. New hydroxyapatite based nanomaterials for potential use in medical fields
  295. The influence of temperature and pressure on possibility of obtaining Al2O3/Ni-P nanocomposite through hot pressing process.
  296. Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
  297. Strain localization in nanocrystalline iron after Severe Plastic Deformation
  298. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  299. Non-elastic behaviours of high-porosity ceramics and ceramic-polymer composites
  300. The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
  301. Microstructure of Ni-P thin layers obtained by a chemical method
  302. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  303. Hydrostatic extrusion and nanostructure formation in an aluminium alloy
  304. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  305. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  306. Quantitative Description of Microstructure of Nano-materials
  307. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  308. Reaction Diffusion in Metallic Systems under High Pressure
  309. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  310. Pressure Effect on Interface Energy, Diffusion and Reactions
  311. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  312. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  313. The Structure and Mechanical Properties of Low Carbon Low Alloy Steel Subjected to Severe Plastic Deformation
  314. Studies of Ni-P Thin Films by Electroles Deposition Method
  315. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  316. Stereology of Nanomaterials
  317. Luminescense of Nanosize ZrO2
  318. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  319. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  320. Targeted Research Project: Metallic, Ceramic and Organic Nanomaterials: Processing - Structure - Properties - Applications
  321. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  322. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  323. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)
  324. Materials Research in Poland

Presentation: Oral at Nanotechnologia PL, by Malgorzata Lewandowska
See On-line Journal of Nanotechnologia PL

Submitted: 2010-07-19 08:05
Revised:   2010-07-19 08:18
Google
 
Web science24.com
© 1998-2018 pielaszek research, all rights reserved Powered by the Conference Engine