Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods

Tomasz Strachowski 1,  Ewa Grzanka 1,  Roman Pielaszek 1,  Adam Presz 1,  Witold Łojkowski 1,  Robert R. Piticescu 2,  Claude J. Monty 3

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland
2. Institute for Non-ferrous and Rare Metals, 102 Biruintei Blvd., Pantelimon 73957, Romania
3. CNRS laboratoire Procedes, Materiaux et Energie solaire (PROMES), BP5 Odeillo, Font-Romeu 66120, France

Abstract

The aim of our work is the description of the morphology of Al - doped zinc oxide obtained by the hydrothermal and vapour condensation methods as well as changes in its alttice cosntant with Al ions addition. The shape and grain size were analysed by Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). The helium pycnometer method was applied for density measurement. The dependence of density and lattice parameters on Al concentration is presented.

Related papers
  1. Looking at the real structure of nanocrystals with powder diffraction: the apparent lattice parameter approach
  2. Hydrothermal Synthesis of ZnAl2O4 Spinel
  3. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  4. Looking beyond limitations of diffraction methods of structural analysis of nanocrystalline materials
  5. Nanostructural characterization and magnetic properties of pure and Fe, Co or Mn-doped TiO2 nanopowders prepared by Solar Physical Vapor Deposition (SPVD)
  6. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  7. Novel synthesis methods of Co-doped ZnO Nanopowders
  8. Excitation transfer in zirconia nanocrystals and ceramics
  9. Eu Luminescence in zirconia nanocrystals
  10. ZnO ceramic sintering and luminescence properties
  11. X-ray and electron microscopy techniques studies on nanocrystalline MgO powder materials prepared by sol-gel method
  12. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  13. Strategia rozwoju badań nanoproszków
  14. Statystyczna analiza deklarowanych kierunków rozwoju nowoczesnych materiałów w projekcie FOREMAT w powiązaniu z tematami polskich prac doktorskich, habilitacyjnych i grantów KBN
  15. Error bars in powder diffraction
  16. Polacy odkryli drugą Ziemię
  17. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  18. Characterization of nanopowders
  19. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  20. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  21. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  22. High pressure-low temperature synthesis of new nanostructured compounds  
  23. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  24. Doped zirconia nanopowders made in microwave – pressure reactor
  25. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  26. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  27. Microstructural analysis of ZnO powders with different concentrations of Al dopant obtained by means of hydrothermal synthesis
  28. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  29. Fast luminescence in ZnO structures
  30. Structure of nanocrystalline powders of MgO prepared by sol-gel method
  31. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  32. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  33. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  34. Mapping dopants effects in the High pressure synthesis of nanostructured zinc oxide
  35. High pressure-low temperature synthesis of new nanostructured compounds
  36. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  37. Study of undoped and doped zirconia nanocrystals luminescence
  38. Catalytic growth by molecular beam epitaxy and properties of ZnTe-based semiconductor nanowires
  39. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  40. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  41. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  42. Production of doped and non doped ceramics nanoparticles for optical applications
  43. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  44. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  45. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  46. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  47. Structure studies on nanocrystalline MgO powders prepared by sol-gel method dried under different conditions
  48. The luminescence properties of ZnO:Al nanopowders obtained by sol-gel and vaporization-condensation methods
  49. Cathodoluminescence of Al doped ZnO nanopowders
  50. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  51. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  52. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  53. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  54. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  55. Hydrothermal synthesis of doped oxide nanomaterials: a review
  56. Synthesis and XRD/PL studies of pure and Sb2O3 doped ZnO nanophases
  57. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  58. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  59. Dyfraktometryczna analiza mikro- i makro-naprężeń w spiekach i kompozytach otrzymanych pod wysokim ciśnieniem i wysoką temperaturą.
  60. Badania własności termicznych nanokryształów metodami dyfraktometrycznymi
  61. Nasze wyniki, zdania i sposoby ich realizacji
  62. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  63. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  64. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  65. Accuracy of XRD size measurements of nanocrystals
  66. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  67. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  68. Preliminary research on zirconia based optical oxygen sensor
  69. Hydrothermal synthesis: opportunities for technology transfer in advanced materials
  70. Preparation and characterisation by XRD and TEM of ZnO based magnetic helionanos
  71. New routes for the synthesis of Al-doped ZnO transparent nanomaterials
  72. Preparation and electrical properties of the BaTiO3 nanoceramics
  73. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  74. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  75. Time-resolved luminescence of nanostructured ZnO
  76. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  77. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  78. Yttria stabilized zirconia nanocrystals luminescence
  79. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  80. Optical investigations of RE-doped YAG nanoceramics
  81. Nanocrystalline SiC compacts obtained by sintering of laser synthesized nanopowders under extreme pressures
  82. Electrical properties of nanocrystalline ZrO2 at high-pressure
  83. Production and sintering of diamond particles with nanometric nickel coating
  84. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  85. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  86. Sintering of nanopowders under high pressure
  87. Synthesis and properties of GaAs nano-composites
  88. SiC-Zn nanocomposites obtained using high-pressure infiltration technique
  89. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  90. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  91. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  92. Nanophase Production Using Solar Energy
  93. Hydrothermal synthesis of nanomaterials: bringing materials closer to life
  94. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  95. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  96. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  97. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  98. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  99. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  100. Biocompatibility of thin films based on hydrothermal synthesized HAp
  101. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  102. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  103. Ionic Conductivity of 4%mol, 9.5%mol Yttria doped Zirconia Nanomaterials and (YSZ )0.98-(Al2O3)0.02 Nanocomposites
  104. Luminescence of ZrO2 nanocrystals
  105. Molecular impurities in the luminescent ZnO nanocrystals
  106. Nano SiC doped MgB2 bulk superconductor with Tc over 42 K by high gas pressure annealing
  107. HYDROTHERMAL SYNTHESIS OF NANOSTRUCTURED ZIRCONIA MATERIALS: PRESENT STATE AND FUTURE PROSPECTS
  108. X-ray diffraction studies of thermal properties of bulk- and surface-atoms of nanocrystalline SiC
  109. Powder precursors for nanoceramics: cleaning and compaction
  110. Examination of the atomic Pair Distribution Function (PDF) of SiC nanocrystals by in-situ high pressure diffraction
  111. Investigation of the microstructure of SiC-Zn nanocomposites by microscopic methods: SEM, AFM and TEM
  112. Sythesis of metal-ceramic nanocomposites by high-pressure infiltration
  113. X-Ray investigations of the natural and artificial White Etching Layer
  114. Diffusion and diffusion induced defects in GaN
  115. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  116. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  117. Relaxation processes in ZrO2 at high pressures
  118. Luminescence of ZrO2 and ZnO nanocrystals
  119. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  120. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  121. Zirconia pressure sensors: from nanopowders to device
  122. New hydroxyapatite based nanomaterials for potential use in medical fields
  123. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  124. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  125. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  126. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  127. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  128. Reaction Diffusion in Metallic Systems under High Pressure
  129. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  130. X-Ray Characterization of Nanostructured Materials
  131. Generetion and Relaxation of Strain in SiC and GaN under Extreme Pressure
  132. Pressure Effect on Interface Energy, Diffusion and Reactions
  133. Influence of high pressure on the polytype structure of nanocrystalline GaN
  134. Transformation of fractal microstructure of nanocrystalline SiC and diamond in high pressures - Small Angle Scattering Study
  135. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  136. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  137. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  138. Luminescense of Nanosize ZrO2
  139. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  140. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  141. Modelling Hydrothermal Synthesis of Ceramic Composite Nanomaterials
  142. Modelling Hydrothermal Synthesis of Ceramic Composite Nanomaterials
  143. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  144. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  145. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Poster at E-MRS Fall Meeting 2006, Symposium C, by Tomasz Strachowski
See On-line Journal of E-MRS Fall Meeting 2006

Submitted: 2006-05-17 12:51
Revised:   2006-06-11 18:26
Google
 
Web science24.com
© 1998-2008 pielaszek research, all rights reserved Powered by the Conference Engine