Studies of Ni-P Thin Films by Electroles Deposition Method

Katarzyna Konopka ,  Krzysztof J. Kurzydlowski 

Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland
Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland

Abstract


STUDIES OF Ni-P THIN FILMS BY ELECTROLES DEPOSITION METHOD
K. Konopka, M. Trzaska, D. Oleszak, W. Zielinski, K. J. Kurzydlowski
Faculty of Materials Science and Engineering, Warsaw University of
Technology, Woloska 141, 02-507 Warsaw, POLAND

Ni-P thin films are produced by electroless process. The deposited
films are amorphous. They can be later crystallised to obtain mixed
amprphous-crystalline and policrystalline structures. The volume
fraction of amorphous phase and the morphology of microstructures were
studied in the presented paper.
The results of X-ray study, calorymetric analysis and microstructure
observation carried out on transmission electron microscope are
reported.
The obtained results reveal kinetic of crystallisation, transition
from amorphous to crystalline microstructure and changes of their
morphology. They can be used to controle final grain size and to
produce nano Ni-P material.

Related papers
  1. Financing of industry relevant projects in Poland
  2. Electrospun nanocomposites from PHBV for bone tissue engineering
  3. Nanotechnologie w gospodarce województwa podlaskiego
  4. Modeling of growth kinetics of SiC single crystal in PVT process
  5. Application of micro- and nanostructured biomaterials in regenerative medicine
  6. Core-shell P(LLA-CL) based electrospun nanofibers for peripheral nerve tissue engineering
  7. Surface modification of PCL scaffold changes protein adsorption
  8. TiO2 nanotubes based composite layers for biomedical applications
  9. Modification of epoxy resin properties by adding multi wall carbon nanotubes
  10. Możliwości badawcze Laboratorium Skaningowej Mikroskopii Elektronowej na WIM PW
  11. Otwarcie konferencji
  12. Perspektywy rozwoju nanomateriałów konstrukcyjnych i funkcjonalnych
  13. Zastosowania mikroskopii AFM dla farmacji i medycyny
  14. Wykorzystanie nanotechnologii w procesie odlewania precyzyjnego
  15. Oczyszczanie i modyfikacja nanomateriałów węglowych
  16. Modyfikacje polimerów stosowanych w lotnictwie za pomocą nanorurek węglowych
  17. Luminescent polyurethane nanocomposites: processing, structure and properties
  18. Micro Sensor for cell force measurement
  19. Preliminary studies on degradation of polylactides fibers
  20. Characterization of diatoms consolidation
  21. Characteristic of surface topography of ancient pottery
  22. Effect of grain size on reactive diffusion between Ti-Al
  23. TEM investigations of the nanostructure, multilayer CrN/Cr coatings obtained by vacuum-arc method
  24. Bulk  nanostructured  titanium  fabricated  by  hydrostatic  extrusion
  25. Composites PLLA/MWNTs produced by twin-screw microcompounder
  26. Polyurethane-based material with calcite and aragonite for tissue engineering composite scaffolds
  27.  A  degradable and highly porous polyurethane scaffolds for bone tissue engineering
  28. Reduced activation ODS ferritic steel – recent development in high speed hot extrusion processing
  29. Investigation of the DLC and novel DLC-polymer hybrid coatings using FIB and SEM techniques
  30. A combination of microCT and FEM methods for development of a new scaffold for bone regeneration
  31. Properties of transparent elastomer nanocomposites (polyurethane/ ZrO2:Eu3+) as materials for optoelectronic application
  32. Investigation of fatique crack growth rate of Al 5484 ultrafine grained alloy after ECAP process
  33. Fire retardant polyurethane elastomers/aluminophosphorate nanocomposites for higher temperature application
  34. The influence of grain refinement on the corrosion mechanism of 7475 aluminium alloy
  35. Modelling the influence of the grain size distribution on the properties of nanometals
  36. Hybrid functional applied to the study of properties of narrow and wide band gap semiconductors
  37. Recrystallization and Grain Growth in Nano-structured Austenitic Stainless Steel under Electric Current Heating
  38. Effect of deformation and strain rate on diminishing of microstructure of aluminium alloys (AlCu4Zr0.5 and AlZn6Mg3CuZr)
  39. Grain refinement in CuCrZr by SPD processing
  40. Tailoring mechanical properties of nano-structured Eurofer 97 steel for fusion applications
  41. Microscopic and surface analytical characterization of TiO2 nanotubes produced by anodic oxidation and thermal treatment 
  42. Investigation of cells interactions with textile scaffolds for bone tissue enginnering
  43. Culture of osteoblasts on nanostructured titanium – preliminary observation
  44. Electrospun polymeric fibers for cartilage regeneration
  45. Biodegradable and bioabsorbable polymeric - ceramic composites for medical applications
  46. Modelling of plastic deformation of nano-polycrystalline materials
  47. Preliminary examinations of mechanical properties of DLC and novel DLC-polymer hybrid coatings for resurfacing hip prostheses
  48. Optimization of the polymeric scaffolds for bone tissue engineering fabricated by rapid prototyping method
  49. Bone tissue engineered product based on human bone derived cells and polyurethane scaffold
  50. Molecular statics simulation of nanoindentation on nanocrystalline copper
  51. Microstructural and mechanical characterization of zirconia based composite
  52. Investigation of compaction of diatoms by die pressing and slip casting method  
  53. Modeling of order-disorder phase transition in intermetallic compounds
  54. Optimization of polyurethane structure as the potential materials for bone tissue engineering applications
  55. Fabricationg polyurethane/calcium carbonate composite scaffold for bone tissue engineering
  56. Polyurethane nano-composites with luminescence properties for optics and optoelectronics applications.
  57. Characteristic of Al2O3 – Ni composites obtained by slip casting method.
  58. Tailoring mechanical properties by grain refinement and particle redistribution
  59. Stochastic Approach To The Changes In The Mechanical Properties Of Nano-Crystalline Materials Induced By Grain Growth
  60. Surface effect on atomic ordering in nano-layered L10 AB binaries: multiscale Monte Carlo Simulation
  61. Kompozyty ceramika-metal
  62. Characterization of nanopowders
  63. Microstructure and mechanical properties of HE-treated titanium depending on its initial state
  64. Influence of hydrostatic extrusion parameters on the microstructure and mechanical properties of 6082 aluminium alloy
  65. The effect of grain size distribution on mechanical properties of nanometals
  66. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
  67. Electron microscopy studies of magnesium hydride
  68. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
  69. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
  70. Characterization of the effects of hydrostatic extrusion on structure and surface properties of 303 austenitic stainless steel
  71. The Effect of Hydrostatic Extrusion on the Corrosion Stability of Austenitic Stainless Steels
  72. The Effect of Hydrostatic Extrusion on Resistance of 316 Austenitic Stainless Steel to Pit Nucleation
  73. Nanomaterials in dental applications
  74. Nanostructure formation in austenitic stainless steel
  75. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
  76. Hydrogen induced changes in 316L stainless steel microstructure
  77. Statistical model of grain growth in polycrystalline nanomaterials
  78. Repair and regeneration of osteochondral defects in the articular joints
  79. Corrosion resistance of nanostructured titanium
  80. Effect of surface treatment on the microstructure of TA6V
  81. Predicting site occupation of Fe in B2 NiAl from ab initio computations
  82. Structure and properties of polyurethane/YAG:Tb3+ nano-composites with luminescence properties
  83. Structure and thermal properties of epoxy resins nano-composites with flame retardants
  84. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  85. An influence of boehmite modification on the dispersion in the polyurethane matrix
  86. Materials hardness estimation by simulation of the indentation process
  87. Stability of second phase particles during processing by hydrostatic extrusion
  88. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
  89. Grain Boundary Migration in Nanocrystalline Iron
  90. Thermal properties of L10-TiAl from first principle calculations
  91. Structural stability of zirconia ceramic in water and acid solutions
  92. The influence of the structure of metastable τ - phase on magnetic hysteretic properties of Мn55.5Аl44С0.5 alloy
  93. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
  94. Evaluation of degradation degree of dental hybrid composite used as permanent fillings
  95. Optimization of particle reinforced lead-free solders
  96. Microstructural evaluation during particles addition to lead-free solders
  97. Thermal stability of hybrid polyurethane and modified boehmite
  98. Applications of quantitative image analysis to the description of the morphology of hybrid polyurea-nitryle-urethanes
  99. Improvement of wetting and bonding of SiO2 ceramics and urea-urethane elastomer
  100. A hybrid atomistic-continuum finite element modelling of locally disordered crystalline structure
  101. The role of the weak points in the corrosion resistance of hydrostatically extruded steel porducts
  102. The size effect in strength and fracture toughness of deformation origin submicro- and nanomaterials.
  103. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
  104. Fabrication and micro-structure characterization of Al2O3/Ni-P composites with interpenetrating phases
  105. Hydrostatic extrusion of intermetallic Ti-Al layers
  106. PULSE PLASMA SINTERING OF A NANOCRYSTALLINE Cu POWDER
  107. NANOCRYSTALLINE Cu-Al2O3 COMPOSITES SINTERED BY THE PULSE PLASMA TECHNIQUE
  108. Mechanical properties of aluminium processed by equal channel angular pressing
  109. Model for intermetallic phase and intermetallic compound solidification during diffusion soldering
  110. Texture Development in Model Al-Li Alloy Subjected to Severe Plastic Deformation
  111. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
  112. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  113. Microstructure refinement under high plastic strain rates in hydrostatic extrusion process
  114. Influence of severe plastic deformation on PLC effect in Al 5XXX alloy
  115. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  116. Formation of ultrafine gradient structure in hard magnetic alloy Fe-30%Cr-8%Co
  117. Sintering temperature effect on structure and properties of Al2O3/Ni-P composites with interpenetrating phases
  118. PLASTIC PROPERTIES OF GaN AND Al2O3 CRYSTAL: FEM-SIMULATION OF NANOINDENTATION CONFIRMED BY HIGH-RESOLUTION MICROSCOPY
  119. SEM investigations of tooth/ filling bonding
  120. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  121. Nanometals for medical applications
  122. Effect of sever plastic deformation method on microstrucure and mechanical properties of Al and Cu
  123. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
  124. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
  125. Polymer matrix composites with nanoparticles of TiC obtained by a sol-gel method
  126. Annealing temperature effect on residual stresses in 316L steel subjected to HPT process
  127. FINITE ELEMENT MODELLING OF THE RESIDUAL STRESSES IN THE CERAMIC-ELASTOMER COMPOSITES
  128. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  129. THE INFLUENCE OF HIGH-ANGLE BOUNDARIES ON THE MECHANICAL PROPERTIES OF NANO-CRYSTALLINE IRON OBTAINED BY SEVERE PLASTIC DEFORMATION
  130. Modelling the interaction of crack tip with nanostructure, which creating by deformation.
  131. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
  132. IN VIVO WEAR OF POLYETHYELNE GLENOID COMPONENTS IN TOTAL SHOULDER ARTHROPLASTY
  133. Atomic-scale Ab-initio computations of the B2-RuAl
  134. Ab-initio calculations of elastic properties Ni3Al and TiAl under pressure
  135. Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
  136. Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
  137. Structural-strength aspects of glass/metallic composite based on Co-Cr-Mo implantation alloy
  138. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
  139. Microstructure of the ceramic - polymer composites for dental applications
  140. Effect of Non-conventional Large Deformations on Microstructure and Properties of Metals
  141. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  142. Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
  143. Al2O3-Fe functionally graded materials fabricated under magnetic field
  144. Novel ceramic matrix composites with metal phase particles in the range from nano to micro - size
  145. Professor CZOCHRALSKI - Distinguished Scientist and Inventor, Founder of the Modern Materials Science
  146. The influence of temperature and pressure on possibility of obtaining Al2O3/Ni-P nanocomposite through hot pressing process.
  147. Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
  148. Strain localization in nanocrystalline iron after Severe Plastic Deformation
  149. Non-elastic behaviours of high-porosity ceramics and ceramic-polymer composites
  150. The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
  151. Microstructure of Ni-P thin layers obtained by a chemical method
  152. Hydrostatic extrusion and nanostructure formation in an aluminium alloy
  153. Quantitative Description of Microstructure of Nano-materials
  154. The Structure and Mechanical Properties of Low Carbon Low Alloy Steel Subjected to Severe Plastic Deformation
  155. Stereology of Nanomaterials
  156. Targeted Research Project: Metallic, Ceramic and Organic Nanomaterials: Processing - Structure - Properties - Applications
  157. Materials Research in Poland

Presentation: poster at E-MRS Fall Meeting 2002, by Katarzyna Konopka
See On-line Journal of E-MRS Fall Meeting 2002

Submitted: 2003-02-16 17:33
Revised:   2009-06-08 12:55
Google
 
Web science24.com
© 1998-2018 pielaszek research, all rights reserved Powered by the Conference Engine