Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.

Sergiy A. Yatsunenko 2Witold Łojkowski 1

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland
2. Polish Academy of Sciences, Institute of Physics, al. Lotników 32/46, Warszawa 02-668, Poland

Abstract

W ciągu najbliższych 10 lat osiągnięcia naukowe w dziedzinie nanofotoniki będą mieli istotny wpływ na postępy w różnych sektorach gospodarczo - przemysłowych. Wiele małych i średnich przedsiębiorstw w tych sektorach ma znaczący udział w stworzeniu i produkcji wysoko zaawansowanych produktów i technologii. Korzystając z najnowszych osiągnięcia naukowych w dziedzinie nanofotoniki  małe i średnie przedsiębiorstwa mogą zwiększyć swój potencjał konkurencyjny na tym rynku.

Projekt Europejski PhotonicRoadSME ma na celu stworzenie indywidualnych technologicznych map drogowych do opracowania badawczo - przemysłowej strategii rozwoju Europy w ciągu najbliższych 5 - 15 lat. Te mapy drogowe pomogą wyznaczyć główne trendy w badaniach, rozwoju, wskazać produkty i zastosowania - techniczny i gospodarczy potencjał.

Małe i średnie przedsiębiorstwa jak również sektory  gospodarczo – przemysłowe mają specyficzne zapotrzebowania. Stworzenie indywidualnych map drogowych i przekazanie tych informacji umożliwi dostęp małych i średnich przedsiębiorstw do Europejskich  naukowo – badawczych wyników z dziedziny fotoniki.

W projekcie biorą udział dziewięć instytucji naukowo - badawczych z różnych krajów Europy, którzy są fachowcami w różnych dziedzinach fotoniki, Europejskimi ekspertami w tworzeniu technologicznych map drogowych i fotonicznych konsorcjów naukowo – badawczych. Głównym polskim wykonawcą jest Centrum Badan Wysokocienieniowych Polkiej Akademii Nauk. Jednostka naukowo - badawcza kierowana przez Prof. dr. hab. Witold Łojkowski, który jest polskim koordynatorem tego projektu.
 

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Quo Vadis nanotechnology- for various stakeholders
  4. Opening of the Thursday Sessions of NanoPl 2014
  5. Microwave reactors for nanoparticle's synthesis
  6. Opening of Nano-Bio-Med session
  7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  8. Tb3+ ion luminescence enhancement in yttria host lattice obtained via microwave hydrothermal process
  9. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  10. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  11. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  12. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  13. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  14. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  15. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  16. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  17. Polish Nanotechnology Platform - a discussion group at Linked-In
  18. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  19. Nanometrology as a tool for nanotechnology problems solving
  20. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  21. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  22. Nanotechnologie w gospodarce województwa podlaskiego
  23. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  24. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  25. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  26. [CEPT] Studies of nanoparticles size distribution
  27. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  28. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  29. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  30. ZnO nanoparticles effect on integrity of human endothelial cells
  31. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  32. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  33. Welcome address
  34. Otwarcie NanoInfoDay, Powitanie
  35. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  36. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  37. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  38. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  39. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  40. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  41. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  42. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  43. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  44. Synthesis of highly biocompatible hydroxyapatite nanopowders
  45. Nanosafety - challenge of nowadays
  46. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  47. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  48. Podsumowanie
  49. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  50. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  51. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  52. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  53. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  54. Procedury charakteryzacji nanoproszków
  55. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  56. Otwarcie konferencji
  57. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  58. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  59. ZrO2:Tb nanopowders obtained by coprecipitation method
  60. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  61. Hydrothermal Synthesis of ZnAl2O4 Spinel
  62. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  63. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  64. Excitation transfer in zirconia nanocrystals and ceramics
  65. Eu Luminescence in zirconia nanocrystals
  66. ZnO ceramic sintering and luminescence properties
  67. Effect of annealing on the structure and microstructure of Pr doped ZrO2-Y2O3 nanocrystals
  68. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  69. Strategia rozwoju badań nanoproszków
  70. Error bars in powder diffraction
  71. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  72. Characterization of nanopowders
  73. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  74. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  75. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  76. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  77. Doped zirconia nanopowders made in microwave – pressure reactor
  78. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  79. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  80. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  81. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  82. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  83. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  84. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  85. Study of undoped and doped zirconia nanocrystals luminescence
  86. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  87. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  88. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  89. Production of doped and non doped ceramics nanoparticles for optical applications
  90. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  91. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  92. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  93. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  94. Cathodoluminescence of Al doped ZnO nanopowders
  95. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  96. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  97. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  98. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  99. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  100. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  101. Luminescence of doped nanoparticles of wide band gap II-VI compounds
  102. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  103. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  104. Nasze wyniki, zdania i sposoby ich realizacji
  105. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  106. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  107. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  108. Accuracy of XRD size measurements of nanocrystals
  109. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  110. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  111. Preliminary research on zirconia based optical oxygen sensor
  112. Preparation and electrical properties of the BaTiO3 nanoceramics
  113. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  114. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  115. Time-resolved luminescence of nanostructured ZnO
  116. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  117. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  118. Yttria stabilized zirconia nanocrystals luminescence
  119. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  120. Optical investigations of RE-doped YAG nanoceramics
  121. Electrical properties of nanocrystalline ZrO2 at high-pressure
  122. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  123. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  124. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  125. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  126. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  127. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  128. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  129. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  130. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  131. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  132. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  133. Biocompatibility of thin films based on hydrothermal synthesized HAp
  134. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  135. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  136. Luminescence of ZrO2 nanocrystals
  137. Molecular impurities in the luminescent ZnO nanocrystals
  138. X-Ray investigations of the natural and artificial White Etching Layer
  139. Diffusion and diffusion induced defects in GaN
  140. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  141. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  142. Relaxation processes in ZrO2 at high pressures
  143. Luminescence of ZrO2 and ZnO nanocrystals
  144. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  145. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  146. New hydroxyapatite based nanomaterials for potential use in medical fields
  147. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  148. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  149. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  150. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  151. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  152. Reaction Diffusion in Metallic Systems under High Pressure
  153. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  154. Pressure Effect on Interface Energy, Diffusion and Reactions
  155. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  156. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  157. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  158. Luminescense of Nanosize ZrO2
  159. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  160. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  161. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  162. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  163. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Poster at Nanotechnologia PL, by Sergiy A. Yatsunenko
See On-line Journal of Nanotechnologia PL

Submitted: 2010-07-19 07:48
Revised:   2010-07-20 12:59