The comparison of the properties of YAG obtained by coprecipitation and SCR method

Tadeusz Chudoba 1Witold Łojkowski 1Ed Lester Jun Lee 

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland

Abstract

[Abstract body is empty now.]

 

Related papers
  1. Hydrothermal Synthesis of ZnAl2O4 Spinel
  2. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  3. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  4. Excitation transfer in zirconia nanocrystals and ceramics
  5. Eu Luminescence in zirconia nanocrystals
  6. ZnO ceramic sintering and luminescence properties
  7. Formation, functionalisation and formulation via continuous hydrothermal synthesis
  8. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  9. Strategia rozwoju badań nanoproszków
  10. Error bars in powder diffraction
  11. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  12. Characterization of nanopowders
  13. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  14. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  15. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  16. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  17. Doped zirconia nanopowders made in microwave – pressure reactor
  18. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  19. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  20. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  21. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  22. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  23. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  24. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  25. Study of undoped and doped zirconia nanocrystals luminescence
  26. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  27. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  28. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  29. Production of doped and non doped ceramics nanoparticles for optical applications
  30. The potential use of doped nanoparticles from hydrothermal synthesis in cell signalling
  31. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  32. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  33. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  34. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  35. Cathodoluminescence of Al doped ZnO nanopowders
  36. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  37. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  38. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  39. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  40. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  41. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  42. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  43. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  44. Nasze wyniki, zdania i sposoby ich realizacji
  45. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  46. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  47. Accuracy of XRD size measurements of nanocrystals
  48. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  49. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  50. Preliminary research on zirconia based optical oxygen sensor
  51. Preparation and electrical properties of the BaTiO3 nanoceramics
  52. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  53. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  54. Time-resolved luminescence of nanostructured ZnO
  55. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  56. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  57. Yttria stabilized zirconia nanocrystals luminescence
  58. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  59. Optical investigations of RE-doped YAG nanoceramics
  60. Electrical properties of nanocrystalline ZrO2 at high-pressure
  61. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  62. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  63. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  64. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  65. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  66. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  67. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  68. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  69. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  70. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  71. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  72. Biocompatibility of thin films based on hydrothermal synthesized HAp
  73. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  74. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  75. Luminescence of ZrO2 nanocrystals
  76. Molecular impurities in the luminescent ZnO nanocrystals
  77. X-Ray investigations of the natural and artificial White Etching Layer
  78. Diffusion and diffusion induced defects in GaN
  79. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  80. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  81. Relaxation processes in ZrO2 at high pressures
  82. Luminescence of ZrO2 and ZnO nanocrystals
  83. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  84. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  85. New hydroxyapatite based nanomaterials for potential use in medical fields
  86. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  87. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  88. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  89. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  90. Application of High Pressure to Processing of Meat
  91. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  92. Reaction Diffusion in Metallic Systems under High Pressure
  93. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  94. Pressure Effect on Interface Energy, Diffusion and Reactions
  95. Transformation of fractal microstructure of nanocrystalline SiC and diamond in high pressures - Small Angle Scattering Study
  96. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  97. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  98. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  99. Luminescense of Nanosize ZrO2
  100. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  101. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  102. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  103. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  104. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Oral at COST action D30 Mid term evaluation meeting, by Tadeusz Chudoba
See On-line Journal of COST action D30 Mid term evaluation meeting

Submitted: 2006-02-09 11:14
Revised:   2006-02-09 11:14
Google
 
Web science24.com
© 1998-2008 pielaszek research, all rights reserved Powered by the Conference Engine