Nanometrology as a tool for nanotechnology problems solving

Witold Łojkowski 

Abstract

Some examples will be given on the corelation between nanostructure and properties of nanoparticles, based on experiences of the Laboratory of Nanostructures for Photonics and Nanomedicine, Institute of High Pressure Physics, PAS, Center for Preclinical Reseaech and Technologies (CePT).

For the avaiable equipment, look at 

http://w3.unipress.waw.pl/nano/index.php?id=aparatura
 

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Quo Vadis nanotechnology- for various stakeholders
  4. Opening of the Thursday Sessions of NanoPl 2014
  5. Microwave reactors for nanoparticle's synthesis
  6. Opening of Nano-Bio-Med session
  7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  9. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  10. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  11. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  12. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  13. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  14. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  15. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  16. Polish Nanotechnology Platform - a discussion group at Linked-In
  17. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  18. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  19. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  20. Nanotechnologie w gospodarce województwa podlaskiego
  21. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  22. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  23. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  24. [CEPT] Studies of nanoparticles size distribution
  25. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  26. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  27. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  28. ZnO nanoparticles effect on integrity of human endothelial cells
  29. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  30. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  31. Welcome address
  32. Otwarcie NanoInfoDay, Powitanie
  33. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  34. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  35. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  36. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  37. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  38. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  39. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  40. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  41. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  42. Synthesis of highly biocompatible hydroxyapatite nanopowders
  43. Nanosafety - challenge of nowadays
  44. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  45. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  46. Podsumowanie
  47. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  48. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  49. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  50. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  51. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  52. Procedury charakteryzacji nanoproszków
  53. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  54. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  55. Otwarcie konferencji
  56. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  57. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  58. ZrO2:Tb nanopowders obtained by coprecipitation method
  59. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  60. Hydrothermal Synthesis of ZnAl2O4 Spinel
  61. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  62. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  63. Excitation transfer in zirconia nanocrystals and ceramics
  64. Eu Luminescence in zirconia nanocrystals
  65. ZnO ceramic sintering and luminescence properties
  66. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  67. Strategia rozwoju badań nanoproszków
  68. Error bars in powder diffraction
  69. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  70. Characterization of nanopowders
  71. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  72. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  73. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  74. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  75. Doped zirconia nanopowders made in microwave – pressure reactor
  76. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  77. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  78. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  79. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  80. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  81. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  82. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  83. Study of undoped and doped zirconia nanocrystals luminescence
  84. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  85. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  86. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  87. Production of doped and non doped ceramics nanoparticles for optical applications
  88. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  89. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  90. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  91. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  92. Cathodoluminescence of Al doped ZnO nanopowders
  93. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  94. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  95. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  96. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  97. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  98. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  99. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  100. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  101. Nasze wyniki, zdania i sposoby ich realizacji
  102. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  103. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  104. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  105. Accuracy of XRD size measurements of nanocrystals
  106. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  107. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  108. Preliminary research on zirconia based optical oxygen sensor
  109. Preparation and electrical properties of the BaTiO3 nanoceramics
  110. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  111. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  112. Time-resolved luminescence of nanostructured ZnO
  113. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  114. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  115. Yttria stabilized zirconia nanocrystals luminescence
  116. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  117. Optical investigations of RE-doped YAG nanoceramics
  118. Electrical properties of nanocrystalline ZrO2 at high-pressure
  119. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  120. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  121. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  122. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  123. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  124. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  125. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  126. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  127. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  128. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  129. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  130. Biocompatibility of thin films based on hydrothermal synthesized HAp
  131. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  132. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  133. Luminescence of ZrO2 nanocrystals
  134. Molecular impurities in the luminescent ZnO nanocrystals
  135. X-Ray investigations of the natural and artificial White Etching Layer
  136. Diffusion and diffusion induced defects in GaN
  137. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  138. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  139. Relaxation processes in ZrO2 at high pressures
  140. Luminescence of ZrO2 and ZnO nanocrystals
  141. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  142. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  143. New hydroxyapatite based nanomaterials for potential use in medical fields
  144. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  145. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  146. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  147. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  148. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  149. Reaction Diffusion in Metallic Systems under High Pressure
  150. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  151. Pressure Effect on Interface Energy, Diffusion and Reactions
  152. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  153. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  154. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  155. Luminescense of Nanosize ZrO2
  156. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  157. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  158. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  159. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  160. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Oral at Nano and Advanced Materials Workshop and Fair, by Witold Łojkowski
See On-line Journal of Nano and Advanced Materials Workshop and Fair

Submitted: 2013-07-27 13:01
Revised:   2013-08-06 09:08