Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT

Witold Łojkowski 1,2Tadeusz Chudoba 1Aleksandra Kędzierska 1Sylwia Kuśnieruk 1Iwona E. Malka 1,3Jan Mizeracki 1Agnieszka Opalińska 1Adam M. Presz 1Dariusz Smoleń 1Joanna Sobczyk 1Anna Swiderska-Sroda 1Jacek Wojnarowicz 1

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland
2. Instytut Wysokich Ciśnień PAN (IWC), Sokołowska 29/37, Warszawa 01-142, Poland
3. Military University of Technology, Faculty of Advanced Technology and Chemistry, Kaliskiego 2, Warszawa 00-908, Poland

Abstract

The research infrastructure, research team and the research programs of the Laboratory of Photonics and Nanomedicine, Center for bio-nanomnaterials, CePT will be presented.

 

Auxiliary resources (full texts, presentations, posters, etc.)
  1. PRESENTATION: Presentation of the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT, OpenDocument Presentation, 0.9MB
  • Legal notice:

    The above materials are subject to Publisher's copyright and the Author(s) intellectual rights. Without limiting Author(s) rights under respective Copyright Transfer Agreement, no part of the above documents may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the express written permission of Pielaszek Research Corporation, the Publisher.
    Express permission from the Author(s) is required to use the above materials for academic purposes, such as lectures or scientific presentations. In such a case, proper references including Author(s) name(s) and URL of this webpage: http://science24.com/paper/28428 must be provided.

 

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Quo Vadis nanotechnology- for various stakeholders
  4. Opening of the Thursday Sessions of NanoPl 2014
  5. Microwave reactors for nanoparticle's synthesis
  6. Opening of Nano-Bio-Med session
  7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  9. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  10. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  11. Microwave Solvothermal Synthesis of High Quality Nanoparticles
  12. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  13. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  14. Zaawansowana Charakteryzacja Nanocząstek
  15. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  16. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  17. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  18. Polish Nanotechnology Platform - a discussion group at Linked-In
  19. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  20. Nanometrology as a tool for nanotechnology problems solving
  21. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  22. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  23. Nanotechnologie w gospodarce województwa podlaskiego
  24. Nanoforce project, presentation of goals and achivements
  25. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  26. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  27. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  28. [CEPT] Studies of nanoparticles size distribution
  29. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  30. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  31. Green Technology and Pilot Unit for Manufacturing of Ultra Clean Concentrated Colloids of Nano Metals
  32. NanoVelos - biotechnological start-up founded by GIZA Polish Ventures. How VC fund may turn your idea into the company with a global perspective
  33. ZnO nanoparticles effect on integrity of human endothelial cells
  34. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  35. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  36. Welcome address
  37. Otwarcie NanoInfoDay, Powitanie
  38. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  39. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  40. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  41. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  42. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  43. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  44. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  45. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  46. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  47. Synthesis of highly biocompatible hydroxyapatite nanopowders
  48. Nanosafety - challenge of nowadays
  49. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  50. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  51. Podsumowanie
  52. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  53. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  54. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  55. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  56. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  57. Procedury charakteryzacji nanoproszków
  58. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  59. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  60. Otwarcie konferencji
  61. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  62. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  63. ZrO2:Tb nanopowders obtained by coprecipitation method
  64. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  65. Synthesis of gallium nitride nanowires by Sublimation Sandwich Method
  66. Synthesis of aluminum nitride nanopowder; compare methods for determination of the grain size in nanopowders 
  67. Hydrothermal Synthesis of ZnAl2O4 Spinel
  68. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  69. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  70. Excitation transfer in zirconia nanocrystals and ceramics
  71. Eu Luminescence in zirconia nanocrystals
  72. ZnO ceramic sintering and luminescence properties
  73. Influence of cycling on microstructure and hydriding/dehydriding properties of nanocrystalline magnesium hydride with nanosized niobium fluoride
  74. Hydrogen absorption and desorption kinetics of magnesium hydride nanocomposite with nanosized metal oxides as catalysts
  75. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  76. Strategia rozwoju badań nanoproszków
  77. Error bars in powder diffraction
  78. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  79. Characterization of nanopowders
  80. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  81. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  82. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  83. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  84. Doped zirconia nanopowders made in microwave – pressure reactor
  85. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  86. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  87. Surface chemistry of Pr-doped nanocrystalline zirconia
  88. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  89. Fast luminescence in ZnO structures
  90. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  91. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  92. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  93. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  94. Study of undoped and doped zirconia nanocrystals luminescence
  95. Catalytic growth by molecular beam epitaxy and properties of ZnTe-based semiconductor nanowires
  96. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  97. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  98. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  99. Production of doped and non doped ceramics nanoparticles for optical applications
  100. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  101. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  102. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  103. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  104. Cathodoluminescence of Al doped ZnO nanopowders
  105. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  106. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  107. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  108. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  109. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  110. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  111. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  112. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  113. Dyfraktometryczna analiza mikro- i makro-naprężeń w spiekach i kompozytach otrzymanych pod wysokim ciśnieniem i wysoką temperaturą.
  114. Nasze wyniki, zdania i sposoby ich realizacji
  115. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  116. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  117. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  118. Accuracy of XRD size measurements of nanocrystals
  119. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  120. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  121. Preliminary research on zirconia based optical oxygen sensor
  122. Preparation and electrical properties of the BaTiO3 nanoceramics
  123. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  124. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  125. Time-resolved luminescence of nanostructured ZnO
  126. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  127. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  128. Yttria stabilized zirconia nanocrystals luminescence
  129. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  130. Optical investigations of RE-doped YAG nanoceramics
  131. Nanocrystalline SiC compacts obtained by sintering of laser synthesized nanopowders under extreme pressures
  132. Electrical properties of nanocrystalline ZrO2 at high-pressure
  133. Production and sintering of diamond particles with nanometric nickel coating
  134. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  135. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  136. Sintering of nanopowders under high pressure
  137. Synthesis and properties of GaAs nano-composites
  138. SiC-Zn nanocomposites obtained using high-pressure infiltration technique
  139. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  140. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  141. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  142. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  143. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  144. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  145. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  146. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  147. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  148. Biocompatibility of thin films based on hydrothermal synthesized HAp
  149. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  150. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  151. Luminescence of ZrO2 nanocrystals
  152. Molecular impurities in the luminescent ZnO nanocrystals
  153. Nano SiC doped MgB2 bulk superconductor with Tc over 42 K by high gas pressure annealing
  154. Powder precursors for nanoceramics: cleaning and compaction
  155. Investigation of the microstructure of SiC-Zn nanocomposites by microscopic methods: SEM, AFM and TEM
  156. Sythesis of metal-ceramic nanocomposites by high-pressure infiltration
  157. X-Ray investigations of the natural and artificial White Etching Layer
  158. Diffusion and diffusion induced defects in GaN
  159. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  160. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  161. Relaxation processes in ZrO2 at high pressures
  162. Luminescence of ZrO2 and ZnO nanocrystals
  163. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  164. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  165. New hydroxyapatite based nanomaterials for potential use in medical fields
  166. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  167. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  168. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  169. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  170. Application of High Pressure to Processing of Meat
  171. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  172. Reaction Diffusion in Metallic Systems under High Pressure
  173. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  174. Pressure Effect on Interface Energy, Diffusion and Reactions
  175. Transformation of fractal microstructure of nanocrystalline SiC and diamond in high pressures - Small Angle Scattering Study
  176. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  177. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  178. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  179. Luminescense of Nanosize ZrO2
  180. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  181. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  182. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  183. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  184. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Invited oral at Nano-Biotechnologia PL, by Witold Łojkowski
See On-line Journal of Nano-Biotechnologia PL

Submitted: 2012-09-03 15:00
Revised:   2012-09-16 19:41