Related papers

Optical oxygen sensor for safe operation in hazardous areas   Optical oxygen sensor for safe operation  in hazardous areas Quo Vadis nanotechnology- for various stakeholders Opening of the Thursday Sessions of NanoPl 2014 Microwave reactors for nanoparticle's synthesis Bioactive GoHAP nanoparticles and their applications in medical implants technology Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki Advanced characterisation of nanomaterials according to ISO 17025 Norm Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles Microwave Solvothermal Technology (MSS) for nanoparticle synthesis [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2 [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials Scanning Electron Microscopy Investigations and Analysis of Nanostructures Polish Nanotechnology Platform - a discussion group at Linked-In Novel optical oxygen sensor for life and health protection made of nano-zirconia Nanometrology as a tool for nanotechnology problems solving Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform? MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds Nanotechnologie w gospodarce województwa podlaskiego Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time. [CEPT] Studies of nanoparticles size distribution [CEPT] Studies of solubility of nanoparticles and stability of their suspension Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT ZnO nanoparticles effect on integrity of human endothelial cells Importance and trends in nanomedicine according  European Nanomedicine Platform survey Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology  Welcome address Otwarcie NanoInfoDay, Powitanie Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation   Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2 Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT Synthesis of highly biocompatible hydroxyapatite nanopowders Nanosafety - challenge of nowadays Influence of heat treatment on luminescence of ZrO2 + Eu nanopowders Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE. Podsumowanie Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE. Hydrothermal Synthesis of Zinc Oxide Nanopowders Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2 Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles Procedury charakteryzacji nanoproszków Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii. Otwarcie konferencji Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce" Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań ZrO2:Tb nanopowders obtained by coprecipitation method ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route Hydrothermal Synthesis of ZnAl2O4 Spinel Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors Excitation transfer in zirconia nanocrystals and ceramics Eu Luminescence in zirconia nanocrystals ZnO ceramic sintering and luminescence properties Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat Strategia rozwoju badań nanoproszków Error bars in powder diffraction Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors Characterization of nanopowders Synthesis of Al doped ZnO nanopowders and their enhanced luminescence Synthesis of nanopowders in supercritical water in a continuous flow reactor A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders" Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders" Doped zirconia nanopowders made in microwave – pressure reactor Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids Advanced nanostructural zirconia ceramics for optical oxygen sensors Study of undoped and doped zirconia nanocrystals luminescence Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties Production of doped and non doped ceramics nanoparticles for optical applications Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG) Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders Cathodoluminescence of Al doped ZnO nanopowders Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods Luminescence and structural properties of rare-earth doped YAG nanoceramics Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties Growth and properties of ytterbium doped KY(WO4)2 nanocomposites Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction Investigations of phase composition and grain size distribution in Pr doped ZrO2 Nasze wyniki, zdania i sposoby ich realizacji Morphology of Al doped zinc oxide obtained by the vapour condensation method The comparison of the properties of YAG obtained by coprecipitation and SCR method Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002 Accuracy of XRD size measurements of nanocrystals Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group Preliminary research on zirconia based optical oxygen sensor Preparation and electrical properties of the BaTiO3 nanoceramics Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend Time-resolved luminescence of nanostructured ZnO Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure Yttria stabilized zirconia nanocrystals luminescence Application of XRD diffraction methods for determination of grain size distribution in nanoparticles Optical investigations of RE-doped YAG nanoceramics Electrical properties of nanocrystalline ZrO2 at high-pressure High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel. Mechanical properties and deformation behaviour of ultra-fine grained nickel. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics Biocompatibility of thin films based on hydrothermal synthesized HAp Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC Luminescence of ZrO2 nanocrystals Molecular impurities in the luminescent ZnO nanocrystals X-Ray investigations of the natural and artificial White Etching Layer Diffusion and diffusion induced defects in GaN Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders Relaxation processes in ZrO2 at high pressures Luminescence of ZrO2 and ZnO nanocrystals Zinc oxide nanopowders obtained by the microwave-hydrothermal route Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders New hydroxyapatite based nanomaterials for potential use in medical fields Correlation between high-pressure ZrO2 electrical properties and crystallite size Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials Pressure Effect on Grain Boundary Diffusion in Al Bicrystals Microstructure of Surface Layers of Raiways After Heavy Exploatation Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure Reaction Diffusion in Metallic Systems under High Pressure High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals Pressure Effect on Interface Energy, Diffusion and Reactions Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni Luminescense of Nanosize ZrO2 Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method Nanostructure Formation on the Surface of Railway Tracks and Wheelsets Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Oral at Nano PL 2014, Symposium B, by Witold Łojkowski See On-line Journal of Nano PL 2014 Submitted: 2014-09-30 20:00 Revised: 2014-09-30 20:00