Advanced characterisation of nanomaterials according to ISO 17025 Norm


Agnieszka Opalińska 1,2Witold Łojkowski 1,3

1. Polish Academy of Sciences, Institute of High Pressure Physics (UNIPRESS), Sokolowska 29/37, Warszawa 01-142, Poland
2. Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland
3. Instytut Wysokich Ciśnień PAN (IWC), Sokołowska 29/37, Warszawa 01-142, Poland

Abstract

[Abstract body is empty now.]

 
 

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Quo Vadis nanotechnology- for various stakeholders
  4. Opening of the Thursday Sessions of NanoPl 2014
  5. Microwave reactors for nanoparticle's synthesis
  6. Opening of Nano-Bio-Med session
  7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  9. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  10. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  11. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  12. Zaawansowana Charakteryzacja Nanocząstek
  13. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  14. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  15. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  16. Polish Nanotechnology Platform - a discussion group at Linked-In
  17. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  18. Nanometrology as a tool for nanotechnology problems solving
  19. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  20. MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds
  21. Nanotechnologie w gospodarce województwa podlaskiego
  22. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  23. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  24. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  25. [CEPT] Studies of nanoparticles size distribution
  26. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  27. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  28. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  29. ZnO nanoparticles effect on integrity of human endothelial cells
  30. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  31. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  32. Welcome address
  33. Otwarcie NanoInfoDay, Powitanie
  34. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  35. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  36. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  37. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  38. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  39. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  40. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  41. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  42. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  43. Synthesis of highly biocompatible hydroxyapatite nanopowders
  44. Nanosafety - challenge of nowadays
  45. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  46. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  47. Podsumowanie
  48. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  49. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  50. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  51. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  52. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  53. Procedury charakteryzacji nanoproszków
  54. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  55. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  56. Otwarcie konferencji
  57. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  58. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  59. ZrO2:Tb nanopowders obtained by coprecipitation method
  60. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  61. Hydrothermal Synthesis of ZnAl2O4 Spinel
  62. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  63. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  64. Excitation transfer in zirconia nanocrystals and ceramics
  65. Eu Luminescence in zirconia nanocrystals
  66. ZnO ceramic sintering and luminescence properties
  67. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  68. Strategia rozwoju badań nanoproszków
  69. Error bars in powder diffraction
  70. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  71. Characterization of nanopowders
  72. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  73. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  74. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  75. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  76. Doped zirconia nanopowders made in microwave – pressure reactor
  77. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  78. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  79. Surface chemistry of Pr-doped nanocrystalline zirconia
  80. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  81. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  82. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  83. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  84. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  85. Study of undoped and doped zirconia nanocrystals luminescence
  86. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  87. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  88. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  89. Production of doped and non doped ceramics nanoparticles for optical applications
  90. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  91. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  92. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  93. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  94. Cathodoluminescence of Al doped ZnO nanopowders
  95. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  96. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  97. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  98. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  99. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  100. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  101. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  102. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  103. Nasze wyniki, zdania i sposoby ich realizacji
  104. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  105. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  106. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  107. Accuracy of XRD size measurements of nanocrystals
  108. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  109. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  110. Preliminary research on zirconia based optical oxygen sensor
  111. Preparation and electrical properties of the BaTiO3 nanoceramics
  112. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  113. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  114. Time-resolved luminescence of nanostructured ZnO
  115. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  116. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  117. Yttria stabilized zirconia nanocrystals luminescence
  118. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  119. Optical investigations of RE-doped YAG nanoceramics
  120. Electrical properties of nanocrystalline ZrO2 at high-pressure
  121. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  122. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  123. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  124. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  125. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  126. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  127. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  128. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  129. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  130. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  131. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  132. Biocompatibility of thin films based on hydrothermal synthesized HAp
  133. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  134. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  135. Luminescence of ZrO2 nanocrystals
  136. Molecular impurities in the luminescent ZnO nanocrystals
  137. X-Ray investigations of the natural and artificial White Etching Layer
  138. Diffusion and diffusion induced defects in GaN
  139. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  140. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  141. Relaxation processes in ZrO2 at high pressures
  142. Luminescence of ZrO2 and ZnO nanocrystals
  143. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  144. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  145. New hydroxyapatite based nanomaterials for potential use in medical fields
  146. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  147. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  148. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  149. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  150. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  151. Reaction Diffusion in Metallic Systems under High Pressure
  152. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  153. Pressure Effect on Interface Energy, Diffusion and Reactions
  154. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  155. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  156. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  157. Luminescense of Nanosize ZrO2
  158. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  159. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  160. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  161. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  162. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Invited Oral at Nano PL 2014, Symposium A, by Agnieszka Opalińska
See On-line Journal of Nano PL 2014

Submitted: 2014-06-30 03:50
Revised:   2014-06-30 03:50