MSS synthesis of highly biocompatible nano-HAP and coating of 3D poymer scaffolds

Witold Łojkowski Aleksandra Kędzierska 1Tadeusz Chudoba 1Jacek Wojnarowicz 1Dariusz Smolen Dariusz Smoleń 2Sylwia Kuśnieruk 1

1. Institute of High Pressure Physics, Warsaw 01-142, Poland
2. NanoVelos Sp. z o.o. (NV), Trakt Lubelski, Warszawa 04-870, Poland

Abstract

[Abstract body is empty now.]

 
 

Related papers
  1. Optical oxygen sensor for safe operation in hazardous areas
  2.   Optical oxygen sensor for safe operation  in hazardous areas
  3. Quo Vadis nanotechnology- for various stakeholders
  4. Opening of the Thursday Sessions of NanoPl 2014
  5. Microwave reactors for nanoparticle's synthesis
  6. Opening of Nano-Bio-Med session
  7. Bioactive GoHAP nanoparticles and their applications in medical implants technology
  8. Wykorzystanie metody NTA (Nanoparticle Tracking Analysis) w ocenie wielkości krążących mikrocząstek osocza i innych płynów fizjologicznych: pułapki i triki
  9. Advanced characterisation of nanomaterials according to ISO 17025 Norm

  10. Microwave solvothermal synthesis of resorbable nano-HAp with controlled grain size.
  11. Microwave Solvothermal Synthesis of High Quality Nanoparticles
  12. Microwave Solvothermal Synthesis of Nano Zinc Oxide Nanoparticles
  13. Microwave Solvothermal Technology (MSS) for nanoparticle synthesis
  14. Zaawansowana Charakteryzacja Nanocząstek
  15. [CEPT] Solvothermal synthesis nano zinc oxide in  microwave reactor MSS2
  16. [CEPT] Solvothermal synthesis and characterization of nanomaterials in the Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials
  17. Scanning Electron Microscopy Investigations and Analysis of Nanostructures
  18. Polish Nanotechnology Platform - a discussion group at Linked-In
  19. Novel optical oxygen sensor for life and health protection made of nano-zirconia
  20. Nanometrology as a tool for nanotechnology problems solving
  21. Creating a Polish Nano-Bio-Technology and  Nano-Medicine Platform?
  22. Nanotechnologie w gospodarce województwa podlaskiego
  23. Characterization of nanomaterials according to EU recommendations, on the example of ZnO nanoparticles
  24. [CEPT] Nanohydroxyapatite-polylactide composites  for regenerative implants
  25. [CEPT] MSS synthesis of highly biocompatible nano-HAP with properties depending on the synthesis time.
  26. [CEPT] Studies of nanoparticles size distribution
  27. [CEPT] Studies of solubility of nanoparticles and stability of their suspension
  28. Iinvestigation of nanoparticles by DSC-TG methods accompanied by chemical analysis of emitted gas
  29. Green Technology and Pilot Unit for Manufacturing of Ultra Clean Concentrated Colloids of Nano Metals
  30. NanoVelos - biotechnological start-up founded by GIZA Polish Ventures. How VC fund may turn your idea into the company with a global perspective
  31. Presentation of the  Laboratory of Nanostructures for Photonics and Nanomedicine, Center of Bio-Nanomaterials, CePT
  32. ZnO nanoparticles effect on integrity of human endothelial cells
  33. Importance and trends in nanomedicine according  European Nanomedicine Platform survey
  34. Application of the Zeiss Ultra Plus scanning microscopy in bio-nanotechnology 
  35. Welcome address
  36. Otwarcie NanoInfoDay, Powitanie
  37. Characteristic of hydroxyapatite dense nanoceramic produced by The High Pressure Consolidation  
  38. Wpływ parametrów materiałowo-technicznych na właściwości optycznego czujnika tlenu na bazie nano-ZrO2
  39. Synteza nano-ZnO przy pomocy reaktora Mettler Toledo w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT.
  40. Infrastruktura i specjalizacje nanotechnologii w Polsce na podstawie wyników ankiety NANOFORCE
  41. Solwotermalna synteza domieszkowanego nanotlenku cynku dla projektu NanoFATE. Otrzymywanie wodnych nanozawiesin domieszkowanego tlenku cynku.
  42. Nanotechnologia bezpieczna dla ludzi i przyjazna środowisku
  43. Badania rozkładu wielkości cząstek i potencjału zeta w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  44. Badanie stabilności i rozpuszczalności zawiesin z nano ZnO i nano ZnO:Co otrzymanych w  Laboratorium Nanostrutur dla Fotoniki i Nanomedycyny CePT
  45. Badania nanoproszków przy pomocy technik DSC-TG/ QMS-FTIR w Laboratorium Nanostruktur dla Fotoniki i Nanomedycyny CePT
  46. Synthesis of highly biocompatible hydroxyapatite nanopowders
  47. Nanosafety - challenge of nowadays
  48. Influence of heat treatment on luminescence of ZrO+ Eu nanopowders
  49. Solvothermal synthesis of doped nano zinc oxide for the project NanoFATE.
  50. Podsumowanie
  51. Solwotermalna synteza domieszkowanego nano tlenku cynku dla projektu NanoFATE.
  52. Hydrothermal Synthesis of Zinc Oxide Nanopowders
  53. Optyczny sensor tlenu na bazie nanokrystalicznego ZrO2
  54. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  55. Solvothermal synthesis of nonstoichiometric hydroxyapatite nanoparticles
  56. Procedury charakteryzacji nanoproszków
  57. Oferty nanoproszków - Laboratorium Nanostruktur, Instytut Wysokich Ciśnien PAN
  58. Nanofotonika dla małych i średnich przedsiębiorstw - mapy dorogowe i analizy SWOT  najważniejszych technologii.
  59. Otwarcie konferencji
  60. Polska  Platforma Nanotechnologii i zarys strategicznego programu "Nanotechnologia i wzrost inwestycji w B&R w Polsce"
  61. Nowe mikrofalowe reaktory do syntez nanocząstek - wybrane zagadnienia badawcze i przykłady zastosowań
  62. ZrO2:Tb nanopowders obtained by coprecipitation method
  63. ZnFe2O4/ZnO core-shell particles obtained by coprecipitation route
  64. Synthesis of gallium nitride nanowires by Sublimation Sandwich Method
  65. Synthesis of aluminum nitride nanopowder; compare methods for determination of the grain size in nanopowders 
  66. Hydrothermal Synthesis of ZnAl2O4 Spinel
  67. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  68. Advanced nanoporous yttria-stabilized zirconia ceramics for luminescent oxygen sensors
  69. Excitation transfer in zirconia nanocrystals and ceramics
  70. Eu Luminescence in zirconia nanocrystals
  71. ZnO ceramic sintering and luminescence properties
  72. Oferta zaawansowanych materiałów w perspektywie 5 - 20 lat
  73. Strategia rozwoju badań nanoproszków
  74. Error bars in powder diffraction
  75. Synthesis of doped ZnO nanopowders in microwave hydrothermal reactors
  76. Characterization of nanopowders
  77. Synthesis of Al doped ZnO nanopowders and their enhanced luminescence
  78. Synthesis of nanopowders in supercritical water in a continuous flow reactor
  79. A summary of results obtained in Working Group 002 "Synthesis and Processing of Nanopowders"
  80. Summary of activities of Working Group D30/003 "Synthesis and Processing of Nanopowders"
  81. Doped zirconia nanopowders made in microwave – pressure reactor
  82. Combining microwave and pressure techniques for hydrothermal synthesis of ZnO and ZrO2 nanopowders doped with a range of metal ions
  83. Luminescence properties of zinc oxide nanopowders doped with Al ions obtained by the hydrothermal and vapour condensation methods.
  84. Mechanical property of nano-TiO2 dispersed Al65Cu20Ti15 amorphous/nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering
  85. Microwave technique applied on the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles
  86. Luminescence properties of cerium doped Y3Al5O12 nanopowders and nanoceramic
  87. Yttrium-Aluminum Garnet Synthesized in the Medium of Supercritical Fluids
  88. Advanced nanostructural zirconia ceramics for optical oxygen sensors
  89. Study of undoped and doped zirconia nanocrystals luminescence
  90. Doping of ZnO nanopowders with Mn, Ni and Cr In an ultrasound and microwave driver hydrothermal reaction
  91. Localization of rare-earth dopants in the lattice of nanocrystalline ZrO2 - EXAFS study
  92. Zirconia-based nanomaterials for oxygen sensor - generation, characterisation and optical properties
  93. Production of doped and non doped ceramics nanoparticles for optical applications
  94. Synthesis, sintering and properties of doped nanocrystalline powders of zirconia, zinc oxide and yttrium aluminum garnet (YAG)
  95. Characterization of nanocrystalline ZrO2 doped with Rare-Earth elements synthesized via High Pressure Hydrothermal Method
  96. Particle Size Distribution of ZrO2:Pr3+- Influences of pH, High Power Ultrasound, Surfactant and Dopant Quantity
  97. Time-Resolved Luminescence Characteristics of Doped YAG and YAP Nanopowders
  98. Cathodoluminescence of Al doped ZnO nanopowders
  99. Morphology of Al doped Zinc Oxide Obtained using Hydrothermal and Vapour Condensation Methods
  100. Luminescence and structural properties of rare-earth doped YAG nanoceramics
  101. Optimization of conditions of preparation of YAG nanopowders for sintering of translucent ceramics
  102. The influence of ZrO2 containing 10% Eu 3+ on the polyurethane hard domain structure of nano-composites with luminescence properties
  103. Growth and properties of ytterbium doped KY(WO4)2 nanocomposites
  104. Investigations on the utilization of nano zinc oxides synthesized by hydrothermal method in rubber compounds
  105. Doping of ZnO nanopowders with Mn and Cr in an ultrasound and microwave driven hydrothermal reaction
  106. Investigations of phase composition and grain size distribution in Pr doped ZrO2
  107. Nasze wyniki, zdania i sposoby ich realizacji
  108. Morphology of Al doped zinc oxide obtained by the vapour condensation method
  109. The comparison of the properties of YAG obtained by coprecipitation and SCR method
  110. Synthesis of nanopowders at elevated pressure and their characterisation - summary of work of the WG-002
  111. Accuracy of XRD size measurements of nanocrystals
  112. Morphology of Al-Doped Zinc Oxide Obtained by the Vapour Condensation Methods
  113. SWOT analysis of various reactors used for synthesis of nanopwoders in our Working Group
  114. Preliminary research on zirconia based optical oxygen sensor
  115. Preparation and electrical properties of the BaTiO3 nanoceramics
  116. Current trends in the development of metallic nanomaterials: results of a study carried out within the EC project Nanoroad SME
  117. Microstructural Evolution in Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend
  118. Time-resolved luminescence of nanostructured ZnO
  119. Prediction of degree of localisation of misfit dislocation cores in intercrystalline interfaces based on interfacial adhesion
  120. Kinetic and thermodynamic factors leading to dissolution of cementite in pearlitic steel subjected to severe plastic deformation under pressure
  121. Yttria stabilized zirconia nanocrystals luminescence
  122. Application of XRD diffraction methods for determination of grain size distribution in nanoparticles
  123. Optical investigations of RE-doped YAG nanoceramics
  124. Electrical properties of nanocrystalline ZrO2 at high-pressure
  125. High-pressure Induced Structural Decomposition of RE-doped YAG Nanoceramics
  126. Synthesis of Al-doped ZnO nanomaterials with controlled luminescence properties
  127. Combination of ECAP and Hydrostatic Extrusion for ultra-fine grain (UFG) microstructure generation in 99.98% nickel.
  128. Mechanical properties and deformation behaviour of ultra-fine grained nickel.
  129. Grain Size and Grain Size Distribution of Nanocrystalline Pr-doped Zirconia Powders Obtained in High Pressure Microwave Reactor
  130. Influence of synthesis conditions on the particles size and the morphology of zinc oxide nanopowders
  131. Measuring the Grain Size Distribution of Pr-doped Zirconia Nanopowders obtained by Microwave Driven Hydrothermal Synthesis
  132. Excellent mechanical properties of UFG metals and alloys, subjected to combination of severe plastic deformation methods.
  133. An FT-IR Spectroscopic Investigation of Hydroxide Groups in Nano-Crystals of ZrO2.
  134. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  135. Structural and luminescence properties of yttrium-aluminum garnet (YAG) nanoceramics
  136. Biocompatibility of thin films based on hydrothermal synthesized HAp
  137. Hybrid HAp- maleic anhydride copolymer nanocomposites obtained by in situ functionalisation
  138. Fabrication and electrical properties of Eu3+:BaTiO3 nanoceramics for SOFC
  139. Luminescence of ZrO2 nanocrystals
  140. Molecular impurities in the luminescent ZnO nanocrystals
  141. X-Ray investigations of the natural and artificial White Etching Layer
  142. Diffusion and diffusion induced defects in GaN
  143. Excellent Mechanical Properties of Nickel Processed by High Pressure Techniques
  144. Microwave driven hydrothermal synthesis of iron oxide - the effect of process parameter on the properties of the nanopowders
  145. Relaxation processes in ZrO2 at high pressures
  146. Luminescence of ZrO2 and ZnO nanocrystals
  147. Zinc oxide nanopowders obtained by the microwave-hydrothermal route
  148. Microwave driven hydrothermal synthesis of Pr-doped zirconia nanopowders
  149. New hydroxyapatite based nanomaterials for potential use in medical fields
  150. Correlation between high-pressure ZrO2 electrical properties and crystallite size
  151. Precise determination of full Grain Size Distribution from diffraction peak profile as a result of kinematical theory of diffraction for polidispersive nanomaterials
  152. Pressure Effect on Grain Boundary Diffusion in Al Bicrystals
  153. Microstructure of Surface Layers of Raiways After Heavy Exploatation
  154. Application of High Pressure to Processing of Meat
  155. Normal Grain Growth in 2-d Strips of Polycrystalline Aluminium Under High Pressure
  156. Reaction Diffusion in Metallic Systems under High Pressure
  157. High Pressure Effect on Grain Boundary Wetting in Aluminium Bicrystals
  158. Pressure Effect on Interface Energy, Diffusion and Reactions
  159. Transformation of fractal microstructure of nanocrystalline SiC and diamond in high pressures - Small Angle Scattering Study
  160. Microwave-Hydrothermal Synthesis of Nanostructured Pr-Doped Zirconia Powders
  161. The Strain Induced Cementite Dissolution in Carbon Steels-Experimental Facts and Theoretical Approach
  162. Effect of SPD Grain Refinement and Peculiarity of Structure and Mechanical Properties of UFG Ni
  163. Luminescense of Nanosize ZrO2
  164. Structure, Morphology and Luminescence Properties of Pr-doped Nanocrystalline ZrO2 Obtained by Hydrothermal Method
  165. Nanostructure Formation on the Surface of Railway Tracks and Wheelsets
  166. Hydrothermal Synthesis of Zinc Oxide Nanopowders with Microwaves Applications
  167. Microwave Driven Hydrothermal Synthesis of Iron Oxide Nanopowders
  168. Indentation Technique for Determination if Mechanical Behavior of Nanomaterials (Bulk and Coatings)

Presentation: Polish Research Projects at Nano and Advanced Materials Workshop and Fair, by Witold Łojkowski
See On-line Journal of Nano and Advanced Materials Workshop and Fair

Submitted: 2013-07-27 13:31
Revised:   2013-07-27 13:31