Nowe materiały metaliczne o strukturze nanometrycznej do zastosowań w nowoczesnych gałęziach gospodarki

Malgorzata Lewandowska 

Warsaw University of Technology, Faculty of Materials Science and Engineering (InMat), Wołoska 141, Warszawa 02-507, Poland

Abstract

[Abstract body is empty now.]

 
 

Related papers
  1. Joining ultrafine grained aluminium by friction stir welding - processing, microstructure and mechanical properties
  2. Experimental evaluation of melting point depression in AlSi/AlN nanomultilayer system
  3. Nanotechnologie w gospodarce województwa podlaskiego
  4. (Cd, Mn)Te Crystals for X and Gamma Radiation Detectors - an Alternative Material to CdTe and (Cd,Zn)Te. 
  5. Industrial perspectives of nanometals
  6. SEM studies of the etched surface of (Cd,Mn)Te
  7. Welcome address
  8. Atomic force microscopy characterization of corneocytes
  9. TiO2 nanotubes based composite layers for biomedical applications
  10. Scale up of nanometals production
  11. Otwarcie konferencji
  12. Reduced activation ODS ferritic steel – recent development in high speed hot extrusion processing
  13. The influence of grain refinement on the corrosion mechanism of 7475 aluminium alloy
  14. Wear resistance of the nanostructured 316 LVM austenitic stainless steel processed by hydrostatic extrusion
  15. Recrystallization and Grain Growth in Nano-structured Austenitic Stainless Steel under Electric Current Heating
  16. Grain refinement in CuCrZr by SPD processing
  17. Tailoring mechanical properties of nano-structured Eurofer 97 steel for fusion applications
  18. Microscopic and surface analytical characterization of TiO2 nanotubes produced by anodic oxidation and thermal treatment 
  19. Ceramic-polymer composites for medical application
  20. Microstructural and mechanical characterization of zirconia based composite
  21. The influence of nanosilica on wear resistance of ceramic-polymer composites intended for dental fillings
  22. Tailoring mechanical properties by grain refinement and particle redistribution
  23. Recent Advances in Making Nanometals by Heavy Plastic Deformation
  24. Morphological and surface analytical characterization of chemically pretreated Ti surfaces intended for biomedical applications
  25. Microstructure and mechanical properties of 7475 aluminium alloy processed by SPD methods
  26. Investigation of aqueous surface processes and corrosion mechanisms of Al-(Cu)-Fe-Cr quasicrystaline approximant
  27. On some peculiarities of electrochemical oxidation of Ti and Ti6Al6V alloy
  28. Nanomaterials in dental applications
  29. Nanostructure formation in austenitic stainless steel
  30. Evaluation of crystal structure and polytypism of SiC in microwave sintered diamond-SiC composite by TEM and HR-TEM
  31. Stability of second phase particles during processing by hydrostatic extrusion
  32. The influence of nano - filler on microstructure homogeneity and selected properties of dental ceramic - polymer composites
  33. Structural stability of zirconia ceramic in water and acid solutions
  34. Morphology and chemical characterization of Ti surfaces modified for biomedical applications
  35. Evaluation of degradation degree of dental hybrid composite used as permanent fillings
  36. The influence of hydrostatic extrusion on mechanical properties and tribological characteristics of an austenitic stainless steel
  37. MECHANISM OF GRAIN REFINEMENT IN ALUMINIUM ALLOYS IN THE PROCESS OF HYDROSTATIC EXTRUSION
  38. The Influence of hydrostatic extrusion on microstructure of 6082 aluminum alloy
  39. SEM investigations of tooth/ filling bonding
  40. Development of microstructure and mechanical properties in nickel deformed by hydrostatic extrusion
  41. Nanometals for medical applications
  42. The influence of twin bands density on microstructure of 316LVM austenitic stainless steel subjected to transverse rolling
  43. Microstructure evaluation in an Al-Li alloy processed by severe plastic deformation
  44. EFFECT OF INITIAL MICROSTRUCTURE ON MECHANICAL PROPERTIES OF THE Al-Cu-Mg-Mn ALLOY PROCESSED BY HYDROSTATIC EXTRUSION
  45. SHRINKAGE OF DENTAL POLYMERIC COMPOSITES
  46. Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
  47. Microstructure of the ceramic - polymer composites for dental applications
  48. Hydrostatic extrusion and nanostructure formation in an aluminium alloy

Presentation: Oral at Nanospotkanie, by Malgorzata Lewandowska
See On-line Journal of Nanospotkanie

Submitted: 2008-04-07 17:13
Revised:   2009-06-07 00:44