E-MRS Fall Meeting 2003

 on-line journal

Presenting person
G-1 JERZY BYSTRZYCKI Nanostructured Ni_3Al intermetallic alloy processed by severe rolling at liquid nitrogen temperature and annealing
G-2 Anna Drużycka-Wiencek Morphology and properties of oxide films formed on the nanocrystalline 316L austenite steel
G-3 Boris M. Efros Metal plasticity during structure formation by twist extrusion
G-4 Malgorzata Lewandowska Hydrostatic extrusion and nanostructure formation in an aluminium alloy
G-5 Alexander Korznikov The Superplasticity of Hard Magnetic Alloy Fe-23wt.%Co-30%Cr with Submicrocrystalline Structure
G-6 Rafail M. Mazitov X-ray Analysis of Cu Subjected to SPD
G-7 Jarosław Mizera Microstructure and mechanical properties of binary Al-Li alloys processed by ECAP
G-8 Zbigniew Pakieła Ductility of Nanocrystalline Materials Processed by Severe Plastic Deformation
G-9 Tomasz Wejrzanowski Modelling of the Influence of the Grain Size Distribution on the Grain Growth in Nanocrystals
G-10 Malgorzata Sus-Ryszkowska Strain localization in nanocrystalline iron after Severe Plastic Deformation
G-11 Malgorzata Sus-Ryszkowska Mechanical properties nanostructured iron obtained by different methods of Severe Plastic Deformation
G-13 Marcin Wojdyr X-Ray investigations of the natural and artificial White Etching Layer
G-14 Laura Perchuc Durability of wheel surface layer in railway wheelsets
G-15 Hristo Dimitrov Crystallization kinetics of Al95-x-yMmxNi5(Co,Fe)y series (x = 4, 5; y = 2, 3)
G-16 Hristo Dimitrov Bulk nanostructured Al-Mm-Ni-(Fe,Co) alloys produced by high-pressure hot compaction of amorphous powders
G-17 Nariman A. Enikeev A physical criterion for the grain subdivision during severe plastic deformation
G-18 Bilousov Mykola Development of in-situ technology for producing nanostructural materials by intensive shear deformation under high pressure.
G-20 Henryk Dybiec Mechanical properties of aluminium wires produced by plastic consolidation of fine grained powders.
G-21 Edward M. Fraś Synthesis of nanoprecipitates of vanadium carbides in the alloys with ferrite matrix
G-22 PAWEŁ KAŁDONEK Hardness and XRD Investigation of Ti/Nb and TiN/NbN Superlattices Prepared by Magnetron Sputtering
G-23 Agnieszka Szymanska Structure and chemical composition of nanocrystalline stainless steel powders obtained by ball milling and duplex stainless steels obtained by their sintering
G-24 Katarzyna Konopka Microstructure of Ni-P thin layers obtained by a chemical method
G-25 Katarzyna Konopka Novel ceramic matrix composites with metal phase particles in the range from nano to micro - size
G-26 Anita Olszówka-Myalska The influence of nickel layer with nanosize grains on aluminium-ceramic interface structure
G-27 Artur Oziębło Al2O3-Fe functionally graded materials fabricated under magnetic field
G-28 Jakub Michalski The influence of temperature and pressure on possibility of obtaining Al_2O_3/Ni-P nanocomposite through hot pressing process.
G-30 Anna Swiderska-Sroda Investigation of the microstructure of SiC-Zn nanocomposites by microscopic methods: SEM, AFM and TEM
G-31 Stanisław Gierlotka Sythesis of metal-ceramic nanocomposites by high-pressure infiltration
G-32 Jacek Jagielski Micromechanical properties of nanometer-thick layers of implanted alumina.
G-34 Maciej Kowalczyk Amorphous bulk alloys from Al-Mm-Ni system
G-35 Dariusz Oleszak Phase transformations in steels subjected to ball milling
G-36 Kirill V. Tretjakov The phase transformation Co-Al alloys by ball milling and mechanical alloying
G-37 Benigna Szeptycka The electrocrystallization of nanonickel
G-38 Natalia SOBCZAK Wettability and reactivity between molten aluminum and selected oxides
G-41 Lukasz Major Multi- layer composite based on amorphous materials and quasicrystals, deposited by laser ablation
G-42 Johan B. Malherbe Production of nano-wires on semiconductor surfaces by ion bombardment
© 1998-2018 pielaszek research, all rights reserved Powered by the Conference Engine